OADM环网的实验研究

研究了光分插复用器(OADM)的关键技术,重点分析了相关的实现技术,完成了利用OADM构建全光环网的实验研究,给出了重要的实验数据,包括眼图、光谱图、光信噪比、保护与恢复等,并对这些实验数据进行了分析,为光传送网的设计与构建提供了重要的参考依据.     

Genotyping of exons 1 to 20 in Duchenne muscular dystrophy by universal multiplex PCR and short‐end capillary electrophoresis

One rapid CE method was established to diagnose Duchenne muscular dystrophy (DMD). DMD is a severe recessive inherited disorder frequently caused by gene deletions. Among them, exons 1–20 account for nearly 30% of occurrences. In this study, the universal multiplex PCR was used to enhance the fluorescently labeling efficiency, which was performed only by one universal fluorescent primer. After PCR, a short‐end injection CE (short‐end CE) speeded up the genotyping of the DMD gene. This method involved no extra purification, and was completed within 9 min. The CE conditions contained a polymer solution of 1.5% hydroxylethylcellulose in 1× TBE buffer at 6 kV for separation. This method was applied to test six DMD patients and one healthy male person. The results showed good agreement with those of multiplex ligation‐dependent probe amplification. This method can be applied for clinical diagnosis of DMD disease. Accurate diagnosis of the DMD gene is the best way to prevent the disease.     

Precise characterization method of antibody‐conjugated magnetic nanoparticles for pathogen detection using stuffer‐free multiplex ligation‐dependent probe amplification

Antibody‐conjugated magnetic nanoparticles (Ab‐MNPs) have potential in pathogen detection because they allow target cells to be easily separated from complex sample matrices. However, the sensitivity and specificity of pathogen capture by Ab‐MNPs generally vary according to the types of MNPs, antibodies, and sample matrices, as well as preparation methods, including immobilization. Therefore, achieving a reproducible analysis utilizing Ab‐MNPs as a pathogen detection method requires accurate characterization of Ab‐MNP capture ability and standardization of all handling processes. In this study, we used high‐resolution CE‐single strand conformational polymorphism coupled with a stuffer‐free multiplex ligation‐dependent probe amplification system to characterize Ab‐MNPs. The capture ability of Ab‐MNPs targeting Salmonella enteritidis and nine pathogens, including S. enteritidis, was analyzed in phosphate buffer and milk. The effect of storage conditions on the stability of Ab‐MNPs was also assessed. The results showed that the stuffer‐free multiplex ligation‐dependent probe amplification system has the potential to serve as a standard characterization method for Ab‐MNPs. Moreover, the precise characterization of Ab‐MNPs facilitated robust pathogen detection in various applications.     

Toward multipurpose NMR experiments

Standard phase cycled NMR pulse sequences were generalized such that for each individual step of the pulse phase cycle the free induction decay is stored separately without phase correction. This is in contrast to the usual practice, where pulse responses are phase shifted immediately (by applying a ‘receiver phase’) and co‐added as they are stored. The approach used here allows one to extract different types of NMR information, which are usually referred to as different ‘experiments’, from the same raw data set a posteriori by using complex linear combinations. Storing the free induction decays of individual phase cycle steps separately and using specific linear combinations of these data to obtain a particular type of information increase the overall efficiency of a given set of NMR experiments substantially, because all information can be derived from a single multiplexed data set. This ‘super‐experiment’ requires only as much time as the most complex of the derived specific experiments alone. The principle of this multipurpose approach was demonstrated by performing different multiple‐quantum filtered COSY experiments. It also becomes possible to generate linear combinations, which differ from the conventionally acquired spectra a posteriori. For example, we implemented diagonal peak reduction by using zero‐ and single‐quantum filtered COSY contributions without requiring additional experiment time. Copyright © 2009 John Wiley & Sons, Ltd.     

旋转光楔多重全息术

本文提出一种新颖的多重全息术,它是利用旋转光楔调制平面参考波的传播方向,实现编码参考光记录获得多重全息图.该全息图经球面波再现,获得位于同一平面内的再现多重象.文中给出了这种方法的理论分析和实验结果,两者是吻合的.     

Online Flowing Colloidosomes for Sequential Multi‐analyte High‐Throughput SERS Analysis

3D plasmonic colloidosomes are superior SERS sensors owing to their high sensitivity and excellent tolerance to laser misalignment. Herein, we incorporate plasmonic colloidosomes in a microfluidic channel for online SERS detection. Our method resolves the poor signal reproducibility and inter‐sample contamination in the existing online SERS platforms. Our flow system offers rapid and continuous online detection of 20 samples in less than 5 min with excellent signal reproducibility. The isolated colloidosomes prevent cross‐sample and channel contamination, allowing accurate quantification of samples over a concentration range of five orders of magnitude. Our system demonstrates high‐resolution multiplex detection with fully preserved signal and Raman features of individual analytes in a mixture. High‐throughput multi‐assay analysis is performed, which highlights that our system is capable of rapid identification and quantification of a sequence of samples containing various analytes and concentrations.     

双路激光混沌复用系统的混沌同步及安全性能研究

针对一种新型的双路激光混沌复用系统, 建立相应的速率方程模型, 详细分析了两个主激光器的单个参数失配、多个参数同时失配、反馈强度差异以及频率失谐对混沌同步性能的影响, 并对此复用系统的安全性能和频谱性能进行了研究. 研究结果表明: 采用参数失配方案, 通过合理选择两个主激光器的参数, 可以保证两个主激光器之间的同步性能较差而两对主从激光器间实现高品质的混沌同步, 因此满足双路激光混沌复用的条件; 两个主激光器之间的参数失配对它们之间的同步性能影响较大, 然而对配对主从激光器间同步性能的影响并不明显, 进一步说明参数失配方案的有效性和可行性. 另外, 通过自相关函数和频谱分别分析混沌复用信号的时域和频域特征, 发现双路激光混沌复用系统可提供更高的安全性.     

基于量子点的多组分分析研究进展

半导体荧光量子点因其独特的一元激发/多元发射、耐光漂白、发射波长可调等光学性质在细胞生物学研究、生物化学传感、药物筛选及示踪、环境监测等诸多领域都得到广泛的应用.本文简述了量子点的基本特性,重点介绍了近年来基于量子点的荧光特性及其与荧光共振能量转移、分子信标、荧光原位杂交等分析技术相结合而发展起来的一些新技术,以及基于QDs的阳极溶出伏安法和电化学发光在多组分分析方面的研究进展,最后就该研究领域现存的问题和将来的发展方向提出了拙见.     

Performance analysis of optical wavelength switching network using multiple output light source

In this paper a 32×32 optical wavelength switching network using the multi-channel and multi-wavelength spectrum-sliced light source is presented where the 2×2 optical-switching elements are utilized in dilated Benes and modified dilated Benes configurations, respectively. The system performances in bit-error rate, especially for the effects of intraband crosstalk, are analyzed in details for the two type networks. Through the simulation studies, the dilated Benes shows better performances than the modified dilated Benes configuration.